User Guide

Award BIOS
3-15
Power Management PM Controlled by APM
PM Controlled by
APM
Yes
No
If "Max Saving" is selected, you can turn on this item,
transfer power management control to APM
(Advanced Power Management) and enhance power
saving function. For example, stop CPU internal
clock.
Power Management Video Off Option
Video Off Option
Always On
All Modes Off
Suspend Off
Susp, Standby Off
To turn off video monitor at which power down mode.
Power Management Video Off Method
Video Off Method
Blank Screen
V/H SYNC+Blank
DPMS
This determines the way that monitor is off. Blank
Screen writes blanks to video buffer. V/H
SYNC+Blank allows BIOS to control VSYNC and
HSYNC signals. This function applies only for DPMS
(Display Power Management Standard) monitor. The
DPMS mode uses DPMS function provided by VGA
card.
Power Management Doze Speed (div by)
Power Management Stdby Speed (div by)
Doze Speed (div by)
1
2
3
4
5
6
7
8
These items let you set the system speed divisor to
specify the rate at which the system speed will slow
down once it enters the Doze Mode or Standby
Mode. The options are from 1 to 8. To determine
the exact rate of the system in Doze mode, take 2 as
the divisor and 133MHz as the normal system speed.
133MHz/2 = 66MHz - this is the system speed in
Doze mode.