User Guide

Award BIOS
3-17
Standby Mode
Disabled
20 Sec
1 Min
5 Min
10 Min
15 Min
20 Min
30 Min
40 Min
This item lets you set the period of time after which
the system enters into Standby mode. In this mode,
CPU clock slows down, hard disk will be shut off and
the monitor power-saving feature activates. Any
activity detected returns the system to full power. The
system activity (or event) is detected by monitoring
the IRQ signals.
Power Management Suspend Mode
Suspend Mode
Disabled
20 Sec
1 Min
5 Min
10 Min
15 Min
20 Min
30 Min
40 Min
This item lets you set the period of time after which
the system enters into Suspend mode. In this mode,
CPU clock stops, all other devices will be shut off.
Any activity detected returns the system to full power.
The system activity(or event) is detected by
monitoring the IRQ signals.
Power Management COM Ports Activity
Power Management LPT Ports Activity
Power Management HDD Ports Activity
Power Management VGA Activity
COM Ports Activity
Enabled
Disabled
To enable or disable the detection of COM port, LPT,
HDD, VGA activities for power down state transition.