User Guide

Award BIOS

3-25

Caution: You can not use both USB driver and

USB legacy keyboard at the same time.

Disable "USB Legacy Support" if you have

USB driver in the operating system.

Integrated Peripherals USB IRQ Released

USB IRQ Released

Yes

USB device is default to use PCI INTD#, the same as

PCI slot4. If you installed PCI card on slot4 and

require to use INTD#, set this item to Yes. The USB

device will then be disabled.

Note: Normally, PCI VGA does not need PCI

interrupt, you may put PCI VGA on slot4.

Integrated Peripherals Onboard FDC Controller

Onboard FDC

Controller

Enabled

Disabled

Setting this parameter to Enabled allows you to

connect your floppy disk drives to the onboard floppy

disk connector instead of a separate controller card.

Change the setting to Disabled if you want to use a

separate controller card.

Integrated Peripherals Onboard UART 1

Integrated Peripherals Onboard UART 2

Onboard UART 1

Auto

3F8/IRQ4

2F8/IRQ3

3E8/IRQ4

2E8/IRQ3

Disabled

This item allow you to assign address and interrupt

for the board serial port. Default is Auto.