User Guide

Hardware Installation
2-11
JP14
3 2 1
Normal Operation
(default)
JP14
3 2 1
Clear CMOS
The procedure to clear CMOS:
1. Turn off the system power.
2. Locate JP14 and short pins 2-3 for a few seconds.
3. Return JP14 to its normal setting by shorting pins 1-2.
4. Turn on the system power.
5. Press during bootup to enter the BIOS Setup Utility and specify a new
password, if needed.
2.2.6 Selecting the CPU Burst Mode
JP22
1-2
2-3
CPU Burst Mode
Linear (Cyrix)
Toggle (Intel/AMD)
JP22 is used to select CPU burst mode
of SIS chipset. For Cyrix CPU, JP22
must be set at 1-2 Linear Mode. For Intel
and AMD CPU, JP22 must be set at 2-3
Toggle Mode.
JP22
3 2 1
Linear (Cyrix)
JP22
3 2 1
Toggle (Intel/AMD)