User Guide

Hardware Installation
2-13
2.3.3 PS/2 Mouse
To connect a PS/2 mouse, insert the
PS/2 mouse bracket connector to PS2
MS on the system board. Then plug in
the PS/2 mouse cable to the mouse
port on the bracket.
Pin
1
2
3
4
5
6
Description
MS DATA
NC
GND
+5V
MS CLK
NC
3 1 2 4
5 6
PS2 MS
2.3.4 Serial Devices (COM1/COM2)
To support serial devices, insert the serial device connector into the serial
port on the bracket. Plug in the 10-pin flat cable to the appropriate onboard
connectors. The serial port 1 connector is marked as COM1 and the serial
port 2 connector is marked as COM2 on the system board.
1 2
COM2
9 10
1 2
COM1
9 10