User Guide

Hardware Installation

2-18

Speaker

Power LED

Keylock

Reset

Suspend SW

Green LED

PANEL

Other housings may have a 12-pin

connector. If your housing has this

type of connector, connect it to

PANEL as shown in the figure.

Make sure that the red wire of the

connector is connected to +5V.

+5V

PANEL

Note: If your housing comes with Turbo switch and

Turbo LED connectors, you may use these connectors

for Suspend switch and Green mode LED functions,

respectively.

Note: Pressing the Suspend switch allows you to

manually force the system to suspend mode.

However, this is possible only if the Power Management

function in the BIOS Setup menu is enabled.