User Guide

AWARD BIOS
3-36
8. Reload the "BIOS SETUP DEFAULT" and reconfigure other items as
previous set.
9. Save & Exit. Done!
Warning: DO NOT turn off the power during
"FLASHING". If the BIOS programming is not
successfully finished, the system will not be boot
again, and you may need to physically replace the
BIOS chip.
Tip: You may load back original BIOS "BIOS.OLD"
by the same procedure.
3.16 Suspend to Hard Drive
Suspend to Hard Drive saves your current work (system status, memory
and screen image) into hard disk, and then the system can be totally power off.
Next time, when power is on, you can resume your original work directly from
hard disk within few second without go through the Win95 booting process and
run your application again. If your memory is 16MB, normally, you need to
reserve at least 16MB HDD space to save your memory image. Note that you
have to use VESA compatible PCI VGA (AOpen PV60/PT60), Sound Blaster
compatible sound card and sound driver that supports APM (AOpen AW35 or
MP56) for Suspend to Hard Drive to work properly. Of course, we recommend
to use AOpen products for best compatibility.
To use Suspend to Hard Drive:
1. Go into BIOS setup, Power Management à Suspend Mode Option, select
"Suspend to Disk".