Specifications

Hardware Installation
2-7
2.2.5 APAR
JP25
1-2
2-3
APAR
Disable
Enable (AC Power
Auto Recovery)
A traditional ATX system should remain at power
off stage when AC power resumes from power
failure. This design is inconvenient for a network
server or workstation, without an UPS, that
needs to keep power-on. This motherboard
implements an APAR jumper to solve this
problem. Setting JP25 to Enabled lets the
system can automatically power-on after AC
power resumes.
JP25
1
2
3
Disabled
JP25
1
2
3
Enabled