User Guide

AMI BIOS Utility

3-22

3.2.6 Peripheral Setup

Select Peripheral from the Setup menu and the following screen

appears.

Onboard FDC

This parameter enables or disables the floppy drive controller.

Onboard Serial Port 1

This parameter allows you to select the address for the first serial port. The

available settings are Auto, 3F8h, 2F8h, 3E8h, 2E8h, and

Disabled. Selecting Disabled deactivates the port.

Onboard Serial Port 2

This parameter allows you to select the address for the second serial port. The

available settings are Auto, 3F8h, 2F8h, 3E8h, 2E8h, and

Disabled. Selecting Disabled deactivates the port.

SERIAL PORT 2 MODE

This parameter allows you to specify the serial port 2 mode. The available

mode selections are:

• Normal - Sets serial port 2 to operate in normal mode. This is the

default setting.