User Guide

AMI BIOS Utility
3-3
3.2 Setup Menu
The figure below shows the Setup window. Use the arrow keys to highlight an
option.
3.2.1 Standard Setup
The following screen appears if you select Standard from the Setup
options:
You can input configuration values such as date, time and disk types in this
menu.
PRIMARY MASTER AND SLAVE/
SECONDARY MASTER AND SLAVE
These parameters allow you to configure the hard disks and the IDE devices
connected to your IDE connectors. To configure the hard disk connected to
the master port of the primary IDE connector, select Primary Master
and press . The following screen appears: