User Guide

AMI BIOS Utility
3-9
Do not change the settings of the Advanced
Setup parameters if you are not a qualified
technician. Doing so may cause fatal system
failure.
Quick Boot
During boot up, the system performs power-on self test (POST) routines.
Enable the parameter if you want to skip some POST routines during the boot
process. Set this to Disabled to let the system perform all the POST
routines and follow the specified boot-up sequence.
Boot-up Sequence
The boot-up sequence allows you to specify the system search sequence.
The selections are C:, A:, CD-ROM , A:, C:, CD-ROM and
CD-ROM, A:, C:. If you have a bootable CD-ROM installed, you may
set the CD-ROM as the first priority. The default is A:, C:, CD-ROM.
Boot-up Numlock
Setting this parameter to On enables the numeric function of the numeric
keypad. Set this parameter to Off to disable the function. Disabling the
numeric function allows you to use the cursor control numeric keypad. The
default setting is Off.