User Guide

Hardware Installation
2-12
2.2.3 Disabling the Onboard Super I/O Controller
JP18
1-2
2-3
Onboard Super I/O
Enabled (default)
Disabled
The board is default by the manufacturer
to enable the onboard Super I/O
controller. In case you wish to use an
external I/O controller, you need to
disable the onboard I/O before the
external I/O card functions. To disable,
set jumper JP18 to 2-3.
JP18
1
2
3
Enabled
(default)
JP18
1
2
3
Disabled