User Guide

Hardware Installation
2-15
For Dallas DS12B887, BENCHMARQ bq3287AMT, or SGS ST
M48T86 PCI chip:
1. Turn off the system power.
2. Locate JP14 and short pins 2-3 for a few seconds. Check your manual
for the correct jumper settings and location of the jumpers.
3. Turn on the system power.
4. Turn off the system power again.
5. Reset JP14 to its normal setting by shorting pins 1-2.
2.2.6 Selecting the DIMM Type
JP25
Open
1-2 & 3-4
Memory Type
SDRAM
EDO
JP25 lets you select your DIMM chip
type. The options are EDO or SDRAM.
JP25
1 2
3 4
SDRAM
JP25
1 2
3 4
EDO