User Guide

Hardware Installation
2-17
2.3.2 CPU Fan
The fan connector is marked FAN on the system board. Plug in the fan cable
to this 2-pin connector onboard. Attach the heatsink and fan to the CPU.
Check its orientation, make sure the air flow go through the heatsink.
+12V
GND
FAN
Air Flow
Heatsink
2.3.3 PS/2 Mouse
Insert a PS/2 bracket connector to the connector
marked PS2 MS on the mainboard. Then plug
in the PS/2 mouse cable to the mouse port on
the bracket.
Pin
1
2
3
4
5
6
Description
MS DATA
NC
GND
+5V
MS CLK
NC
3 1 2 4
5 6
PS2 MS