User Guide

Hardware Installation

2-27

2.3.12 IrDA Connector

Serial port 2 can be configured to support wireless infrared module via this

connector and application software such as Laplink. This module enables the

user to transfer files to or from laptops, notebooks, PDA and printers without

using cables. This mainboard supports IrDA (115Kbps, 1 meter), as well as

ASK-IR (19.2Kbps).

To install an infrared module, insert the

module cable to IrDA connector then enable

infrared function by BIOS setup. Make sure of

the correct cable orientation when connecting

the cable to the IrDA connector.

Description

+5V

IRRX

GND

IRTX

+3.3V

IrDA