User Guide

Hardware Installation
2-12
Bank 0 Bank 1 Total
SIMM 0 SIMM 1 SIMM
2
SIMM
3
Memory
4 MB 4 MB 64 MB 64 MB 136 MB
8 MB 8 MB 64 MB 64 MB 144 MB
16 MB 16 MB 64 MB 64 MB 160 MB
64 MB 64 MB 64 MB 64 MB 256 MB
128 MB 128 MB 256 MB
128 MB 128 MB 264 MB
4 MB 4 MB 128 MB 128 MB 272 MB
8 MB 8 MB 128 MB 128 MB 288 MB
16 MB 16 MB 128 MB 128 MB 320 MB
64 MB 64 MB 128 MB 128 MB 384 MB
128 MB 128 MB 128 MB 128 MB 512 MB
2.7.1 Installing a SIMM
Observe the ESD precautions when installing
components.
Follow these steps to install a SIMM:
1. Slip a SIMM at a 45° angle into a
socket. If the SIMM does not
completely fit into the socket,
reverse the SIMM orientation.
The SIMM has a curved edge
indicating pin 1 that ensures
installation in one direction only.
curved edge