User Guide

Hardware Installation
2-13
Be careful when inserting or removing SIMMs.
Forcing a SIMM in or out of a socket can
damage the socket or the SIMM (or both).
2. Gently push the SIMM up until
the pegs of the socket slip into the
holes on the SIMM and the
holding clips lock the SIMM into a
vertical position.
The SIMM should be at a 90angle when
installed.
2.7.2 Removing a SIMM
To remove a SIMM:
1. Press the holding clips on both
sides of the SIMM outward to
release it.
2. Press the SIMM downward to
about a 45° angle.
3. Gently pull the SIMM out of the
socket.