User Guide

Hardware Installation
2-18
2.10 Connecting Peripherals
2.10.1 Power Cable
A standard power supply has two cables
with six wires each. Plug these cables
to the onboard power connector in such
a way that all the black wires are in the
center. The power connector is marked
CN2 on the system board.
Make sure that the power supply is off before
connecting or disconnecting the power cable.
2.10.2 Mouse
PS/2 Mouse (optional)
To connect a PS/2 mouse, simply insert
the PS/2 bracket connector onto CN10
on the system board.