User Guide

Hardware Installation
2-19
Plug a PS/2 mouse into the mouse
port on the bracket.
Serial Mouse
To connect a serial mouse, plug in the serial bracket connectors onto the CN1
and CN6. Insert the serial mouse connector into the appropriate COM port
on the bracket. See section 2.10.3.
2.10.3 Serial Devices (COM1/COM2)
To support serial devices, insert the
serial device connector into the serial
port on the bracket. Plug in the serial
port bracket connectors onto the
appropriate onboard connectors. The
COM1 connector is marked CN1 and
the COM2 connector is marked CN6 on
the system board.