User Guide

Hardware Installation
2-22
2.10.7 Front-panel Switches and LEDs
HDD LED
The HDD LED connector is marked
CN17 on the board. Plug the HDD
LED socket onto this four-pin
connector. See the figure.
Multifunction Connector
The multifunction connector is a 20-pin
connector marked CN16 on the board.
Attach the green mode LED, keylock,
reset switch, break switch, and speaker
connectors to its corresponding pins on
the connector as shown in the figure.
( Turbo Switch ) ( Turbo LED )
Break Switch Green Mode LEDReset
Speaker Power LED Keylock
Some housings have a five-pin
connector for the keylock and power
LED.
Speaker Keylock & Power LED
Break Switch Green Mode LED
( Turbo Switch ) ( Turbo LED )
Reset