User`s manual

Installing and Using the Axel-VNCviewer 5
-
Auto Reconnection
: yes or no, to automatically connect this session on
re-connection.
-
General Parameters
: press <Space> to display the following box:
These parameters are:
-
Resolution
: the default resolution of a VNC session is 800x600.
Press <Space> to change to 1024x768.
Note
: to check if the 1024x768 resolution is available refer to
Chapter 6.4.
-
Shared Session
and
Keyboard and Mouse Ignored
: these
parameters allow several VNC terminals to share the same
graphical display. For more information, refer to Chapter 6.2.
-
Local Mouse Cursor
: if 'yes', the local mouse cursor location is
indicated by a little square pointer (2x2 pixels). This could be useful
when the local mouse cursor location is different from the VNC
cursor location (for example when the Unix/Linux box or the
network are overloaded).
-
Emulate a 3-button Mouse
: if 'yes', the mouse middle button is
emulated by clicking both left and right buttons.
-
Mouse Accelerator
: if 'yes', the AX3000 speeds up the mouse
cursor.
Note
: after exiting set-up, we advise a power-cycle of the AX3000.