User Guide

3.4 Jumper Settings

JP2 Speaker Output

JP14 Clear CMOS Data

Allows you to turn off the voice from buzzer and

speaker. You can choose not to be bothered by the

warning made from Dr. Voice when it detects any error

in operating system.

You can clear CMOS to restore system default setting. To

clear the CMOS, follow the procedure below.

1. Turn off the system and unplug the AC power.

2. Remove ATX power cable from connector PWR2.

3. Locate JP14 and short pins 2-3 for a few seconds.

4. Return JP14 to its normal setting by shorting pin 1 & pin 2.

5. Connect ATX power cable back to connector PWR2.

Buzzer

(default)

Speaker

JP2 Speaker Output Jumper

Normal

(default)

Clear CMOS

JP14 Clear CMOS Jumper