User Guide

Overview
1-10
1.4 System Voltage Monitoring
AX5T implements a voltage monitoring system. As you turn on your system, this
smart design will continue to monitor your system working voltage. If any of the
system voltage is over the component's standard. There will be alarm through
speaker or application software such as ADM (Advanced Desktop Manager) for
a warning to user. System voltage monitoring function monitors 5V, 12V, 3.3V
and CPU core voltage 2.8V. It is automatically implemented by BIOS and ADM,
no hardware installation is needed.
To use System Voltage Monitoring:
1. Go into BIOS setup, Integrated Peripherals à System Voltage (there are
12V/5V/3.3V and 2.8V), select Monitor.
2. Install ADM.
Note: Because of hardware limitation, the CPU
core voltage other than 2.8V will not be monitored.