User Guide

Frequently Asked Questions
B-10
switch is now used as Suspend switch. However, some MBs still support
Turbo/Deturbo function via keyboard. You can set the system to Deturbo by
pressing <Ctrl> <Alt> <->. To back to Turbo mode, press <Ctrl> <Alt> <+>.
Note that the Deturbo mode has been removed in new MBs since these require
more code space in Flash ROM.
Q: Power Management Icon does not appear in the Windows 95 Control Panel
even though the APM under BIOS Setup is enabled.
A: This problem occurs if you did not enable the APM function before you install
Windows 95. If you have already installed Windows 95, re-install it after the
BIOS APM function is enabled.
Q: Why does the system fail to go into suspend mode under Win95?
A: This problem may be caused by your CDROM settings. The CDROM Auto
Insert Notification of Win95 is default enabled, the system will continue to
monitor your CDROM, auto-execute application when a CD diskette is loaded,
and prevents the system from entering into suspend mode. To resolve this, go
into Control Panel è System è Device Manager è CDROM è Setting, and
disable the "Auto Insert Notification" function.
Q: What is Windows 95 Registry?
A: The functions of Windows 95 Registry and the Windows 3.1 INI files are almost
the same. Both store the hardware and software configurations. The only
difference is that Registry is a database while INI is text file. You can run
REGEDIT.EXE to further understand the Registry structure. Checking and
studying the structure of this file will help you solve some configuration
problems.
Q: Why are there question marks or "standard IDE controller" presented
under Device Manager after installing Win'95 on AP5T/AX5T based
system?
A: Intel has introduced 430TX chipset with latest feature of "ACPI", "USB" & "Ultra
DMA/33". Since these devices are so new that Win'95 did not anticipate to
support them on Aug. of '95 which Win'95 initially is being released. Under
Win'95 Device Manager, you may see following devices installed: