User Guide

Hardware Installation
2-18
2.9.2 Mouse
PS/2 Mouse
To connect a PS/2 mouse, simply plug
in the PS/2 mouse cable connector to
CN2 on the system board.
Serial Mouse
To connect a serial mouse, plug in the mouse cable connector to CN1
(COM1) or CN5 (COM2). See section 2.9.4.
2.9.3 USB Devices
You need a USB bracket to enable your
system to support USB device(s). To
attach a USB bracket, simply insert the
bracket connector to the onboard USB
connector. See section 2.2 for the
location of the USB connector.