User Guide

Hardware Installation
2-19
2.9.4 Serial Devices (COM1/COM2)
To support serial devices, insert the
serial device connectors to the
appropriate COM ports marked CN1
(COM1) and CN5 (COM2) on the
system board.
2.9.5 Floppy Disk Drives
Connect the drive cable to the floppy
disk drive connector marked J4 on the
system board. See section 2.2 for the
location of the connector. Refer to the
figure on how to connect the cables.
2.9.6 Printer
Plug in the printer cable to the onboard
parallel connector marked CN4. Refer
to the figure.