User Guide

AWARD BIOS
3-28
3.9 Integrated Peripherals
The following screen appears if you select the option "Integrated Peripherals"
from the main menu. This option allows you to configure the I/O features.
ROM PCI/ISA BIOS (XXXXXXXX)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
IDE HDD Block Mode: : Enabled
IDE Primary Master PIO : Auto
IDE Primary Slave PIO : Auto
IDE Secondary Master PIO : Auto
IDE Secondary Slave PIO : Auto
On-Chip Primary PCI-IDE : Enabled
On-Chip Secondary PCI-IDE : Enabled
USB Host Controller : Disabled
USB Legacy Support : Disabled
ECP Mode Use DMA : 3
Onboard FDC Controller : Enabled
Onboard Serial Port 1 : AUTO
Onboard Serial Port 2 : AUTO
Onboard IR Controller : Enabled
IR Mode : HPSIR
IR Address Selection : 2E8H
IR IRQ Selection : IRQ10
FIR Mode Use DMA : Disabled
Modem Wake Up : Disabled
Onboard Parallel Port : 378/IRQ7
Parallel Port Mode : SPP
ESC: Quit : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift) F2 : Color
F6 : Load Setup Defaults
F7 : Load Turbo Defaults
Integrated Peripherals IDE HDD Block Mode
IDE HDD Block
Mode
Enabled
Disabled
This feature enhances disk performance by allowing
multisector data transfers and eliminates the interrupt
handling time for each sector. Most IDE drives,
except with old designs, can support this feature.