User Guide

AWARD BIOS
3-31
Onboard IR
Controller
Enabled
Disabled
To enable or disable onboard wireless Infrared
controller.
Integrated Peripherals IR Mode
IR Mode
ASKIR
IrDA
This item selects the mode of onboard wireless
Infrared controller. The IrDA standard includes both
HPSIR and FIR, the driver in the Win95 will
automatically change to different mode according to
different chip.
• ASKIR - Select this setting if you installed an Infrared module via
IrDA connector (refer to section 2.3 "Connectors "). This ASKIR setting
allows infrared serial communication at a maximum baud rate of 19.2K
baud.
• HPSIR - Select this setting if you installed an Infrared module in
your system via IrDA connector (refer to section 2.3 "Connectors"). The
HPSIR setting allows infrared serial communication at a maximum baud
rate of 115K baud.
• FIR - Select this setting if you installed an Infrared module via IrDA
connector (refer to section 2.3 "Connectors "). This FIR (Fast IR) setting
allows infrared serial communication at a maximum baud rate of 4M
baud.
Integrated Peripherals IR Address Selection
IR Address Selection
2E0H
2E8H
2F8H
3E0H
3E8H
3F8H
This item selects the address of IR controller.
Integrated Peripherals IR IRQ Selection