User Guide

3
4. Other Cautions
Caution:
q When moving the equipment, make sure that the disc
has been removed from the drive.
q When not using the drive for a long period, dust may
adhere to the disc tray. Before using the drive again, use
dry air cleaner to remove the dust from the tray.
q When connecting connectors, make sure that the power
is OFF. If the power is ON, there is a possibility of short
circuit.
5. How to Use the Discs
Caution:
q When using CD-ROM discs, CD-R discs or CD-RW
discs, don' t attach any stickers or labels to the discs.
Using discs with them attached not only causes read
and write errors, but data on the disc may be lost due to
damage to the disc itself.
Load the disc
1 Press the eject button.
2 place the disc on the disc tray.
Caution:
q When using a 120 mm CD, place it in the large round
depression. When using 80 mm CD, place it in the small
round depression. The face with the label on it should be
up. Never place both discs in the tray at the same time.
q Be careful not to touch the recording surface of the disc.