Specifications

ChaCha

Cha

pter 4.pter 4.

pter 4.

Cop Cop

Cop

y Smary Smar

y Smar

t as hosted CD drit as hosted CD dri

t as hosted CD dri

eses

4.1 Connect Copy Smart to host computer

Step 1: Please make sure your computer has SCSI host adapter installed,

and that SCSI host adapter should be LUN enable. (Please refer the

user manual of SCSI host adapter. If you use ACARD’s SCSI

adapter, you could refer to Appendix F.)

Step 2: Connect Copy Smart to SCSI host

adapter with external SCSI cable.

Note: ARS2020 Copy Smart is use just one SCSI ID

only, and provides two CD drives for host

computer, please check LUN function enable

on your system.

4.2 Cofigruing Copy smart

Step 1: Setting up SCSI ID. DO NOT use the same SCSI ID with other SCSI

devices which are on same SCSI bus.

Step 2: Setting up SCSI termination On/Off.

If Copy Smart is the last device on SCSI bus, user should set SCSI

termination ON, Or should be OFF.

4.3 Hardware requirement

CPU: Pentium-100 / RAM: 32MB

H.D.D.: 75MB free space on hard drive.

Interface: Ultra SCSI host adapter installed

4.4 Software requirement

O.S.: Windows 95/98/2000, or Windows NT4

Utilities: DupeBoy utilities, it includes “DupeBoy Disc Copier” and

“DupeBoy Audio Copier”. And SCSIDE utilities, it can config-

ures/updates Copy Smart.

Optional Utilities: Adaptec EZ-CD creator, Direct-CD which are fully

compliant for Copy Smart.

Adjust SCSI ID

Chapter 4. Copy Smart as hosted CD drives