Specifications

Document No. DER03022 INSTALLATION INSTRUCTIONS
Page 14 of 15 Effective Date 23 Dec 08
SENSOR CONNECTIONS
A customer-supplied cable is used for sensor connections. One end of the cable is connected to
terminals in the sensor junction box as shown in Figure 3022-11, and the opposite end is
connected to the plug supplied with the centrifuge (Figure 3022-12). Connect leads to the
corresponding numbered terminals (1 through 16) in the plug. After completing the wiring, plug
the cable into the receptacle on the upper left side of the control cabinet.
Figure 3022-11 Sensor System Junction Box Connections