User Guide

146
F
F
o
o
r
r
t
t
r
r
e
e
s
s
s
s
9
9
1
1
0
0
0
0
O
O
n
n
l
l
i
i
n
n
e
e
M
M
a
a
n
n
u
u
a
a
l
l
Open
A
Using or to select an option, then press .
3.4.1 Host Adapter BIOS
This option enables or disables the SCSI controller BIOS. The default setting is Enabled.
The SCSI controller BIOS must be enabled if you want the system to boot from a SCSI hard disk
drive connected to the SCSI controller. Several SCSISelect™ options cannot be used unless the
SCSI controller BIOS is enabled.
3.4.2 Display <Ctrl-A> Message During BIOS Initialization
This option allows entering the SCSISelect™ utility during BIOS initialization. The default setting is
Enabled.
3.4.3 Extended BIOS Translation for DOS Drives > 1 GByte
This option allows you to enable or disable extended translation for SCSI hard disks with a capacity
greater than 1 GB. This is valid only if the SCSI controller BIOS is enabled. The default factory
setting is Enabled.
When enabled, this option uses the following translation schemes: