Installation Guide of FM56-SVV Soft PCI Modem Support O/S 1. Windows 9x 2. Windows ME 3. Windows 2000 4. Windows NT 5.
Hardware Installation 1. Turn off the computer. No power must be applied to your computer when you install the internal modem, or the computer could be damaged. 2. Make sure you can freely access the back of the personal computer. Remove the computer cover. 3. Select any available PCI slot into which you can install the internal modem. 4. Unscrew and remove the slot cover. 5.
Software Installation Installation Procedures for Windows 9x 1. Restart PC after inserting the PCI modem into the PCI slot of PC. When Windows detects communication device, the message "This wizard searches for new drivers for: PCI Communication Device" is displayed. Click Next. 2. To search for the best drivers for your device, click Next. 3. Insert the driver CD into your CD-ROM drive and then specify the location E:\Drivers\Usa_Asia\FM56-SVV\Win9x (E is your CD-ROM drive.
. Windows will show the message ”Windows driver file search for the device “AOpen PCI Modem Enumerator” and show the location of driver. Click Next. 5. Click Finish to complete the installation of AOpen PCI Modem Enumerator. 6. Then Windows detects the PCI modem, the message "This wizard searches for new drivers for: AOpen FM56-SVV Soft PCI Modem" is displayed. Click Next. 7. To search for the best drivers for your device, click Next.
8. Indicate the same location E:\Drivers\Usa_Asia\FM56-SVV\Win9X (E is your CD-ROM drive. If you are a European user, select Europe folder for instead. If you are an Australian user, select Australia folder for instead.) and then click Next. 9. Windows will show the message ”Windows driver file search for the device “AOpen FM56-SVV Soft PCI Modem” and show the location of driver. Click Next. 10. Click Finish to complete the installation of AOpen FM56-SVV Soft PCI Modem.
11. Then Windows detects the wave device, the message "This wizard searches for new drivers for: Wave Device for Voice Modem" is displayed. Click Next. 12. To search for the best drivers for your device, click Next. 13. Indicate the same location E:\Drivers\Usa_Asia\FM56-SVV\Win9x (E is your CD-ROM drive. If you are a European user, select Europe folder for instead. If you are an Australian user, select Australia folder for instead.) and then click Next.
14. Windows will show the message ”Windows driver file search for the device “Voice Modem Serial Wave Device” and show the location of driver. Click Next. 15. Windows will show the message ”Windows driver file search for the device “Voice Modem Serial Wave Device” and show the location of driver. Click Finish to complete the installation of Voice Modem Serial Wave Device.
Installation Procedures for Windows ME 1. Restart PC after inserting the PCI modem into the PCI slot of PC. When Windows detects the PCI communication device, the message "Windows has found the following new hardware: PCI Communication Device" is displayed. Select “Automatic search for a better driver” or ”Specify the location of the driver”. Insert the driver CD into your CD-ROM drive and then click Next. If you select ”Specify the location of the driver”.
4. Windows then detects the modem device, the message "Windows has found the following new hardware: Modem Device" is displayed. Select “Automatic search for a better driver” and then click Next. 5. Select AOpen FM56-SVV Soft PCI Modem whose location is E:\DRIVERS\USA_ASIA\FM56-SVV\WINME (E is your CD-ROM drive. If you are a European user, select Europe folder for instead. If you are an Australian user, select Australia folder for instead.) and then click OK. 6.
Installation Procedures for Windows 2000 1. Restart PC after inserting the PCI modem into the PCI slot of PC. When Windows detects the modem, the wizard will help you to install the new device. Click Next to begin installation. 2. Select “Search for a suitable driver for my device”. Then click Next. 3. Insert the driver CD into your CD-ROM drive. Select “Specify a location” only and then click Next.
4. Choose Browse to specify the location: E:\Drivers\Usa_Asia\FM-56SVV\Win2K (E is your CD-ROM drive. If you are a European user, select Europe folder for instead. If you are an Australian user, select Australia folder for instead.) and then click OK. 5. Wizard will find the correct driver for the new device. Then click Next. 6. Windows has finished installing the software. Click Finish to complete the installation.
Installation Procedures for Windows NT 1. Insert driver CD into your CD-ROM drive and then double click Setup icon from the path: E:\Drivers\Usa_Asia\FM56-SVV\WinNT. (E is your CD-ROM drive. If you are a European user, select Europe folder for instead. If you are an Australian user, select Australia folder for instead.) 2. You will see the Modem Board Installation Wizard and then click Next. 3. Wizard will install the modem driver of AOpen FM56-SVV Soft PCI Modem. Click Next to go into next step.
4. Click Finish to complete installation.
Installation Procedures for Windows XP 1. Restart PC after inserting the PCI modem into the PCI slot of PC. 2. When detects modem, Windows will install the Windows build-in driver automatically. 16. 3. You can see the new device in Device Manager. Highlight this new device and click right button of mouse. Select Update Driver item to update the driver. 4. Select “Install from a list or specific location” and then click Next. 5. Select “Don’t search. I will choose the driver to install.
6. Click Have Disk to select the new driver. 7. Insert driver CD into your CD-ROM drive. Click Browse to indicate the location: E:\Driver\FM56-SVV\WinXP (E is your CD-ROM drive. If you are a European user, select Europe folder for instead. If you are an Australian user, select Australia folder for instead.) and then click OK. 8. Select the model named AOpen FM56-SVV Soft PCI Modem and then click Next. 9. Click Finish to complete update procedures.
