User Guide

2.5 Set Up Motherboard
In
AOpen Slim PC H300
series, it's very easy to set up a motherboard. Just lift the hard disk
frame and place the motherboard in the correct position. Finally, tighten the screws. Please follow the
steps below:
Read the handbook of the motherboard and adjust the settings of Jumper
Currently most of the motherboards have a Jumper-free design (Jumperless design).
Even so, there are still some other functions that need to be adjusted through Jumper.
Please refer to the handbook of motherboard and adjust the settings of Jumper
according to your personal requirements.
Please refer to the
motherboard handboo
k
to adjust the settings o
f
Jumper according to
your needs
Level the motherboard at the opening of the back panel and plug it in the
housing at angle of 45 degrees.
2-10
Start To Handle