Table of Contents Table of Contents Table of Contents ................................................................................... 1 1.1 A Thank-you Note Before You Get Start..........................................................3 1.2 Features of This Manual ...............................................................................4 1.3 Safety Information ......................................................................................4 Chapter 2 Introduction to This Motherboard .....
Super 5.1 Channel Audio Effect ...................................................................25 Connecting Front Audio ..............................................................................26 Connecting CD_IN .....................................................................................27 Connecting AUX_IN ...................................................................................28 Connecting Case Open .............................................................................
1.1 A Thank-you Note Before You Get Start First of all, we would like to express our gratitude for purchasing AOpen products. Once again, this motherboard is designed uniquely to meet all your personal needs with our great industry-designing ability and our everlasting perseverance to the quality of all our products. This manual will introduce you how this motherboard is installed. Please keep it well for your future reference. If you lost your printed manual, you may also go to our website at http://www.
1.2 Features of This Manual To help you grab the useful information of this motherboard and aware of certain conditions that you might need to know, you will see the icons below frequently: Note This contains knowledge you should know in process of assembling, or some helpful tips. Warning / Caution Warning Please be careful when you see this mark. It highlights mistakes that occur often during assembling, or something you need to pay attention to.
Chapter 2 Introduction to This Motherboard Chapter 2 Introduction to This Motherboard 2.1 How does your motherboard look like? 14 15 16 17 18 20 19 2 21 1 3 4 22 5 23 6 24 25 26 28 8 27 10 29 12 1. Resetable Fuse 16. Front Audio Connector 2. JP28 PS2 KB/Mouse Wakeup Jumper 17. Onboard AC’97 CODEC 3. 4-pin 12V ATX Power Connector 18. AUX_IN Connector 4. AGP 8X Expansion Slot (i865Gm-I&i865Gm-IL) 19. CD_IN Connector 5. 5. 6. 6. 6. 7. 20.
2.2 Specification Here is the main function of your motherboard.
2.
Chapter 3 Hardware Installation Chapter 3 Hardware Installation 3.1 Quick Installation Procedure 12. Installing Drivers & Utilities 1. Installing CPU 11. Installing Operating System (such as, Windows XP) 2. Installing CPU Fan & System Fan 3. Installing Memory Module 10. Loading Default BIOS, Setting CPU Frequency 4. Installing HD, CD-ROM and SATA Disk, etc 9. Connecting Back Panel Ports (Keyboard, Mouse, etc) 8. Installing Other Devices (USB, Front Audio, etc) 5. Connecting Front Panel Cable 7.
3.2 Installation You Have to Know Installing CPU This socket supports FC-PGA2 package CPU, which is the latest CPU package developed by Intel. Other forms of CPU package are impossible to be fitted in. 1. Pull up the CPU socket lever and up to 90-degree angle. 2. Locate Pin 1 in the socket and look for a golden arrow on the CPU upper interface. Match Pin 1 and golden arrow. Then insert the CPU into the socket. 3. Press down the CPU socket lever to finish CPU installation.
Installing CPU and System Fans Plug the CPU fan cable to the 3-pin CPUFAN connector. If you have chassis fan, you can also plug it in SYSFAN1 or SYSFAN2 connector. SENSOR +12V GND SYSFAN1 Connector SENSOR GND +12V +12V SENSOR GND CPUFAN Connector SYSFAN2 Connector Note: Some CPU fans do not have sensor pin so that they cannot support fan monitoring.
Installing CPU Fan 1. Gently put down the CPU fan on the retention module with four clips aligning correctly to the four holes. Make sure the two levers are in opposite direction. 2. Press down the clips into the holes one by one. Make sure the clips are firmly fixed into the holes. Clip Hole 3. Pull two levers down toward the opposite direction to secure the cpu fan. Note: The picture above may look different from the product you purchased.
Installing Memory Modules DIMM slots are designed in black which are very easy to recognize. Insert the module straight down to the DIMM slot with both hands and press down firmly until the DIMM module is securely in place. Tab Pin 1 Key Note: The tabs of the DIMM slot will clip to hold the DIMM in place when the DIMM touches the slot’s bottom.
Maximum The Performance of the Dual Channel To obtain the highest performance of Dual Channel, the configuration of DIMM must meet the following conditions. Matched DIMM configuration in each channel ● same density (128MB~1GB) ● Same DRAM bus width (x8 or x16) ● Either single-sided or double-sided Note: Using memory modules of different chip and density will cause system unstable.
Connecting IDE and Floppy Cables Connect the 34-pin floppy cable and 40-pin, 80-wire IDE cable to floppy connector and IDE connector. Be careful of the pin1 orientation. Wrong orientation may cause system damage.
Connecting Front Panel Cable Attach the power LED, speaker and reset switch connectors to the corresponding pins. If you enable “Suspend Mode” item in BIOS Setup, the ACPI & Power LED will keep flashing while the system is in suspend mode. Locate the power switch cable from your ATX housing, which is a 2-pin female connector from the housing front panel. Plug this connector to the soft-power switch connector marked SPWR.
Connecting ATX Power Cables This motherboard comes with a 20-pin and 4-pin ATX power connector as shown below. Make sure you plug them in the right direction. We strongly recommend you to insert the 4-pin connector before connecting the 20-pin connector.
3.3 Other Installation for Your Reference Setting CPU Voltage and Frequency Setting CPU Core Voltage This motherboard supports Voltage ID (VID) function to detect CPU voltage automatically during power-on. Setting CPU Frequency This motherboard is of CPU jumper-less design; you can set CPU frequency by 1MHz stepping CPU Overclocking in the BIOS. CPU Core Frequency = CPU FSB clock x CPU Ratio. However, all CPU now sold in market belong to "Fixed Multiplier".
Connecting Serial ATA To connect a serial ATA disk, you have to have a 7-pin serial ATA cable. Connect two ends of the serial ATA cable to the serial ATA header on the motherboard and the disk. Like every other traditional disk, you also have to connect a power cable. Please be noted that it is a jumper free implement; you don’t need to set jumpers to define a master or slave disk.
Adjusting your Hard Disk Setting Except its original 2 sets of parallel IDE, this motherboard supports the latest serial ATA hard disk. If you are unable to find your newly installed serial ATA hard disks on your operating system after having them installed, the problem may lie in the BIOS setting. You can simply adjust BIOS settings to have them work properly. After installing your hard disks properly, you can directly go to BIOS setting screen for adjustment.
If you desire to change the default setting, press Enter for selection list: Disabled: You can choose this item if there are only traditional IDE hard disks had been installed on your system. Disabling this item will also cancel the detection of serial ATA hard disks during POST, which will theoretically speed up your boot-up time a little bit; however, please remember to re-adjust the setting here if you want to use serial ATA hard disk later. Auto: This is factory default setting on this motherboard.
Connecting AGP 8X Expansion Slot i865Gm-I / i865Gm-IL provide an AGP 8X slot. The AGP 8X is a bus interface targeted for high-performance 3D graphic. Traditionally AGP used both rising and falling edge of the 66MHz clock for 4X AGP, and the data transfer rate could achieve 66MHz x 4bytes x 4 = 1056MB/s. Now AGP is moving to AGP 8X mode, which is upgraded to 66MHz x 4bytes x 8 =2.1GB/s.
Connecting IrDA The IrDA connector can be configured to support wireless infrared module, with this module and application software such as Laplink or Windows Direct Cable Connection, user can transfer files to or from laptops, notebooks, PDA devices and printers. This connector supports both HPSIR (115.2Kbps, 2 meters) and ASK-IR (56Kbps). Install an infrared module onto the IrDA connector and enable the infrared function from BIOS Setup, UART Mode, you can use this function.
10/100/1000Mbps LAN Supported (1000Mbps for i865Gm-IL) On the strength of Gigabit LAN controller on board, this motherboard provides 10/100/1000Mbps (it is 10/100Mbps for i865Gm-I and i865GVm-I) Ethernet for office and home use. The Ethernet RJ45 connector is located on the top of USB connectors. The right hand side LED indicates link mode; it lights in yellow when linking to network.
Connecting USB2.0 This motherboard provides eight USB 2.0 ports to connect USB devices such as mouse, keyboard, modem, printer, etc. There are four ports on the back panel. You can use proper cables to connect Front USB connector to USB modules or chassis front panel.
Super 5.1 Channel Audio Effect This motherboard comes with a Realtek AC’97 CODEC (ALC650), which supports high quality of 5.1 Channel audio effects, bringing you a brand new audio experience. On the strength of the innovative design of ALC650, you're able to use standard line-jacks for surround audio output without connecting any external module. To apply this function, you have to install the audio driver in the Bonus Pack CD as well as an audio application supporting 5.1 Channel.
Connecting Front Audio If the housing is designed with an audio port on the front panel, you’ll be able to connect onboard audio to front panel through this connector. By the way, please remove the jumper cap from the Front Audio Connector before you connect the cable. Do not remove this yellow jumper cap if your housing doesn’t have an audio port on the front panel.
Connecting CD_IN This connector is designed to connect CD Audio cable from CDROM or DVD drive to onboard sound.
Connecting AUX_IN This connector is used to connect MPEG Audio cable from MPEG card to onboard sound.
Connecting Case Open The “CASE OPEN” header provides chassis intrusion-monitoring function. To make this function work, you have to enable it in the system BIOS, connect this header to a sensor somewhere on the chassis. So, whenever the sensor is triggered by lights or by the opening of the chassis, the system will beep to inform you.
Connecting S/PDIF (Sony/Philips Digital Interface) S/PDIF (Sony/Philips Digital Interface) is a newest audio transfer file format, which provides impressive audio quality through optical fiber and allows you to enjoy digital audio instead of analog audio. Through a specific audio cable, you can connect the S/PDIF connector to other end of the S/PDIF audio module, which bears S/PDIF digital output.
Colored Coded Back Panel The onboard I/O devices have PS/2 Keyboard, PS/2 Mouse, RJ-45 LAN Connector, COM1, VGA port, Printer, USB, AC’97 sound and game ports. The view angle of drawing shown here is from the back panel of the housing. USB 2.0 PS/2 Mouse Ports Connector SPP/EPP/ECP Parallel Port RJ45 LAN Jack Line-In Speaker Out MIC-In PS/2 Keyboard Connector COM 1 Port VGA Port USB 2.0 Ports PS/2 Keyboard: For standard keyboard, which use a PS/2 plug.
LED Indication LED indication including Standby LED and AGP LED are AOpen’s considerate designs that aim at providing you friendly system information. STBY LED will light up when power is provided to the motherboard, giving you a convenient indication check the system power status in circumstances such as power on/off, stand-by mode and RAM power status during Suspend to RAM mode. AGP LED aims to protect your motherboard from being damaged by over voltage of AGP card.
3.4 Jumper Settings JP28 Keyboard / Mouse Wakeup Jumper This motherboard provides PS2 keyboard / mouse wake-up function. 1 Disable (Default) 1 Enable JP28 PS2 KB/Mouse Wakeup Jumper 1 Normal (default) JP14 Clear CMOS Jumper 1 Clear CMOS You can clear CMOS to restore system default setting. To clear the CMOS, follow the procedure below. JP14 Clear CMOS Data 1. Turn off the system and unplug the AC power. 2. Remove ATX power cable from connector PWR2. 3.
Chapter 4 Special Features and Utilities Chapter 4 Special Features and Utilities Other Useful Features With excellent design ability of R&D team, AOpen boasts for its various powerful and handy features that come with our product like follows. You are welcomed to visit our technical website to learn more about those features. http://english.aopen.com.
Chapter 5 Setting BIOS Chapter 5 Setting BIOS Introduction System parameters can be modified by going into BIOS Setup menu; this menu allows you to configure the system parameters and save the configuration into the 128 bytes CMOS area (normally in the RTC chip or in the main chipset). The Phoenix-Award BIOS™ that installed in the Flash ROM of the motherboard is a custom version of an industry standard BIOS.
How To Use Phoenix-Award™ BIOS Setup Program Generally, you can use arrow keys to highlight items that you want to choose, press key to select, and use and keys to change setting values. You can press key to quit Phoenix-Award™ BIOS setup program. The following table provides details about how to use keyboard in the Phoenix-Award BIOS setup program.
BIOS Upgrade under Windows environment With outstanding R&D ability of AOpen, we now bring you a whole new BIOS Flash wizard ---- EzWinFlash. With an eye to convenience for users, EzWinFlash combines the BIOS binary code and flash module together, so the only thing you have to do is just clicking on the utility you downloaded from web and let it help you complete the flash process automatically.
You may accomplish BIOS upgrade procedure with EzWinFlash according to following steps, and it’s STRONGLY RECOMMENDED to close all applications before you start the upgrades. Download the latest version of BIOS package zip file from AOpen official web site. (Ex: http://english.aopen.com.tw/) Unzip the downloaded BIOS package (ex: WSGMAXII102.ZIP) with WinZip (http://www.winzip.com) in Windows environment. Save the unzipped files into a folder, for example, WSGMAXII102.EXE & WSGMAXII102.BIN.
Vivid BIOS technology Have you been fed up with the conservative and immutable POST screen? Let’s rule out the tradition idea that POST screen are stiff and frigid, and let AOpen show you the newly developed VividBIOS to experience the lively vivid colorful POST screen! Unlike earlier graphic POST screen which could occupy the whole screen and mask text information during POST, AOpen VividBIOS deals with graphics and texts separately, and makes them running simultaneously during POST.
Chapter 6 Installing Drivers Chapter 6 Installing Drivers There are motherboard drivers and utilities included in AOpen Bonus CD. You don’t need to install all of them in order to boot your system. But after you finish the hardware installation, you have to install your operation system first (such as Windows XP) before you can install any drivers or utilities. Please refer to your operation system’s installation guide. Auto-run Menu from Bonus CD You can use the auto-run menu of Bonus CD.
Installing Intel Extreme Graphics 2 Driver This motherboard is based on Intel 865G/865GV which provides integrated VGA Engine in die. For optimized 3D performance, please installing its driver by choosing Intel(R) Extreme Graphic driver for WIN2000/XP in the Bonus Pack CD auto-run menu Installing Audio Driver This motherboard comes with RealTek ALC650 AC’97 CODEC. You can find the audio driver from the Bonus Pack CD auto-run menu.
Installing LAN Driver This motherboard comes with Intel 10/100/1000Mbps (1000Mbps is only for i865Gm-IL) LAN controller on board, which is a highly-integrated Platform LAN connect device providing 10/100/1000Mbps Ethernet for office and home use. You can find the LAN driver from the Bonus CD Pack auto-run menu. Installing USB 2.0 Driver This motherboard comes with USB2.0 function. You can install USB2.0 Driver under Windows 98SE, Windows ME, Windows 2000 and Windows XP from the Bonus Pack CD auto-run menu.
Chapter 7 Troubleshooting Chapter 7 Troubleshooting 43
Chapter 8 Technical Support Chapter 8 Technical Support Dear Customer, Thanks for choosing AOpen products. We invite you to register at http://www.aopen.com to become a Gold Member of Club AOpen so as to ensure quality service in the future. In order to maintain the best service to every customer of us, we recommend you to follow the procedures below and seek help from our branches according to the region you buy the product.
Model Name and BIOS Version Model name and BIOS version can be found on upper left corner of first boot screen (POST screen). For example: Phoenix AwardBIOS v6.00PG, An Energy Star Ally Copyright (C) 2003, Phoenix Technologies, LTD. i865GVm-I R1.02 June. 01. 2003 AOpen Inc. i865GVm-I is model name of motherboard; R1.02 is BIOS version Register Your Motherboard Thanks for choosing AOpen product, please register this motherboard at http://club.aopen.com.
Technical Support 46
