User Guide

ISDN Router Manual V.1.1
65
9. Easy Setup From Telephone Keypad
The router provides a easy configuration way through the analog port. If you use TEL-A port then
you can setup the corresponding attributes only for TEL-A. If you are using TEL-B, you can
setup the configuration for TEL-B only. If your router installed with LCD panel then you can check
all of the relative setting on the LCD panel. Otherwise if your router doesn’t come with a LCD
panel, you can still operate but hear the confirmation tone only.
Easy Setup
Operation
Meaning Value Description LCD Display
* 1 2 8 Enter into programming
Mode
Instruct TA to enter into
programming mode
EASY SETUP
V.1100
Flash/
On-hook
Cancel setting Cancel the current operation Cancel
* * Store setting into active
profile
Save the current setting into
active memory profile
# # Display corresponding
setting item
Inspect the setting
# * # Store setting into
Non-volatile memory
Save the current setting into
NV-RAM
FINISH
n=0 Ring TEL-A only GLOBAL
TEL:A
1 Ring TEL-B only GLOBAL
TEL:B
0 0 * n Global Call Select
2 Ring TEL-A and TEL-B GLOBAL
TEL:A¡AB
n=0 Disabled inner communication INNER
OFF
0 1 * n Inner Communication
1 Enabled INNER
ON
n=1 No receive priority PRIORITY
OFF
2 Ring TEL-A first PRIORITY
TEL:A
0 2 * n Receive Priority
3 Ring TEL-B first PRIORITY
TEL:B
n=1 Display TEL-A CHARGE
A$000000
2 Display TEL-B CHARGE
B$000000
0 3 * n Accumulate Charge
Display
3 Display data port CHARGE
D$000000
n=1 Initialize TEL-A INITIALIZE
TEL:A
2 Initialize TEL-B INITIALIZE
TEL:B
0 4 * n Initialize Charge
3 Initialize data port INITIALIZE
DATA
0 5 * n Factory Default DEFAULT
VALUE