User Guide

Hardware Installation
2-6
press Power button at the same time. Note that do not
release <Home> key until POST screen appearing.
2.2.4 Onboard Audio
JP12
1-2
2-3
Onboard Audio
Enabled (default)
Disabled
If you want to install another sound card,
you have to disable the onboard audio by
setting this jumper to Disabled.
JP12
1
2
3
Enabled (default)
JP12
1
2
3
Disabled
2.2.5 KB/MS Wakeup
JP28
1-2
2-3
KB/MS Wakeup
Disabled
Enabled
This jumper is used to enable or disable
Keyboard/Mouse Power ON function. If you
select Enabled, you may decide the wakeup
mode from BIOS Setup. To implement this
function, the 5V Stand By current must be
greater than 800mA.
Note that only PS/2 mouse supports Wake On
Mouse function.
JP28
1
2
3
Disabled
JP28
1
2
3
Enabled