User`s guide

AWARD BIOS
3-18
Hot Key Power On
Ctrl-F1
Ctrl-F2
Ctrl-F3
Ctrl-F4
Ctrl-F5
Ctrl-F6
Ctrl-F7
Ctrl-F8
Ctrl-F9
Ctrl-F10
Ctrl-F11
Ctrl-F12
If you select “Hot Key” option in “Power On
Function” Item, you need to specify a hot key here.
Integrated Peripherals ? Onboard FDC Controller
Onboard FDC
Controller
Enabled
Disabled
Setting this parameter to Enabled allows you to
connect your floppy disk drives to the onboard
floppy disk connector instead of a separate
controller card. Change the setting to Disabled if
you want to use a separate controller card.
Integrated Peripherals ? Onboard Serial Port 1
Integrated Peripherals ? Onboard Serial Port 2
Onboard Serial Port 1
Auto
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled
This item allow you to assign address and interrupt
for the board serial port. Default is Auto.
Note: If you are using a network card, make
sure that the interrupt does not conflict.