User Guide

Overview
1-8
1.3 ACPI Suspend to DRAM
This motherboard supports ACPI Suspend to DRAM function. With this function,
you can resume your original work directly from DRAM without going through
the Win98 booting process and run your application again. Suspend to DRAM
saves your current work into the system memory. To implement ACPI Suspend
to DRAM, please follow the procedures as below.
System Requirement
1. An ACPI OS is required. Currently, Windows 98 is the only choice. (Please
refer to 1.2 for details.)
2. The Intel INF Update Utility and the AGP driver must be installed properly.
Procedures
1. Changed the following BIOS settings.
BIOS Setup à Power Management à ACPI Function: Enabled.
BIOS Setup à Power Management à ACPI Standby: S3.
2. Go to Control Panel --> Power Management. Set “Power Buttons” to
“Standby”.
3. Press power button or standby button to wake up the system.