User Guide

Hardware Installation
2-14
2.3.2 CPU Fan
Plug in the fan cable to the two-pin fan connector onboard. The fan
connector is marked CPUFAN on the system board. Attach the heatsink and
fan to the CPU. Check its orientation, make sure the air flow go through the
heatsink.
+12V
GND
CPUFAN
2.3.3 PS/2 Mouse
To connect a PS/2 mouse, insert the
PS/2 mouse bracket connector to PS2
MS on the system board. Then plug in
the PS/2 mouse cable to the mouse
port on the bracket.
Pin
1
2
3
4
5
6
Description
MS DATA
NC
GND
+5V
MS CLK
NC
3 1 2 4
5 6
PS2 MS