User Guide

Windows NT 4.0
Caution:
• Before installing the Display driver, make sure your Windows NT is
installed in VGA mode and work fine.
• Please install the Windows NT 4.0 service pack 3 before installing
the video driver. Otherwise, the system may cause setup failed
and won’t be able to start up.
• D: present the drive containing the installation CD.
Setup VGA Mode
1. Follow Setup Driver steps 1~3.
2. When the Select Device dialog box appears
on screen, select Show all devices item
to show all VGA devices.
3. Select Standard display types from the
manufacturers and select VGA compatible
display adapter from the Display then
click OK button.
4. After you complete installing Standard
VGA driver, click Close button and
restart Windows to enable the VGA driver.
Setup VGA Driver (Manual Setup)
1. Start NT and insert the Installation CD
into the CD-ROM drive.
2. Click mouse right button on the desktop
and select Properties from the pop-up
menu, or double-click Display icon from
the Control Panel folder.
3. Select Settings->Display Type and then
click Change button.