User manual

Anypos600 Point of Service
NOTE：
1 、 Remove the bottom cover before you connect the peripherals to the bottom Connectors. The
bottom panel ports may be different from others depending on the specification and types.
2
、 The default setting of VFD customer display port(RJ45) is COM2 or COM4. If you want to
use DB9 port instead of RJ45, the special wire is needed.
Removing the bottom cover
1. Rotate the display until it’s
max angle.
2. Press bottom of the front
panel with your thumbs, and
press triangle sign at back of
bottom cover with other
fingers.
3. While holding the bottom
cover gently, pull the bottom
cover firmly in the direction
of arrow to remove it.
Attaching the customer display
6