User manual

Anypos600 Point of Service

conflicts,

making changes to the Power Management configuration, and changing the User or

Supervisor password, etc.

Main Screen

When you start the Setup Utility, the main menu appears. See the picture below.

Standard CMOS features

Use this menu to set basic system configuration.

Advanced BIOS Features

Use this menu to set the advanced features available on your system.

 First/Second/Third Boot Device

Set the boot device sequence as BIOS attempts to load the disk operating system.

The settings are:

HDD-0 The system will boot from first HDD.

SCS The system will boot from SCSI.

CD-ROM The system will boot from CD-ROM.

HDD-1 The system will boot from second HDD.

HDD-2 The system will boot from third HDD.

HDD-3 The system will boot from fourth HDD.

USB-FDD The system will boot from USB floppy drive.

USB-ZIP The system will boot from USB ZIP drive.

USB-CDROM The system will boot from CDROM.

USB-HDD The system will boot from HDD.

LAN The system will boot from network drive.