User manual

Anypos600 Point of Service

ReQuests) and DMAs (Direct Memory Access).

PC Health Status

This section shows the status of your CPU, fan, warning for overall system status.

Frequency/Voltage Control

Use this menu to set DRAM voltage, DRAM clock, and DRAM timing, etc.

Load Fail-Safe Defaults

This option on the menu allows users to restore all the BIOS setting to the default Fail

Safe values. These values are set by manufacturer to provide a minimal and stable

system.

Load Optimized Defaults

This option on the main menu allows users to restore all the BIOS settings to the default

Optimized values. The Optimized Defaults are the default values also set by the

manufacturer for both optimized and stable performance of the mainboard.

Set Supervisor Password

This option on the main menu allows supervisor to set password.

Set User Password

This option on the main menu allows user to set password.

Save & Exit Setup Option

To quit the Setup Utility and save the user setup changes to RTC CMOS.

Exit Without Saving

To quit the Setup Utility without saving any changes to RTC CMOS.