User manual

Anypos600 Point of Service

CHAPTER 3

DRIVER INSTALLATION

About Installation

The driver utilities and software are installed by following methods:

1. Install from the CD drive.

2. Install from the USB CDROM, USB-HDD/ ZIP/FDD or Flash disk.

3. Install from internet.

NOTE： If the system boots from the USB device, configure the BIOS Setup Utility

first. (See the BIOS SETUP UTILITY on Chapter 2)

Software Description

HDD or CD contains driver utilities and software after manufactured.

The directory are as below:

DRIVERS：

CHIPSET // Enhances the chipset.

VGA // Enhances the graphic chip.

AUDIO // Enhances the audio chip.

LAN // Enhances LAN chip.

USB // USB2.0 driver

TOUCHSCREEN // Enhances Touchscreen chip

MODEM // Enhances Modem chip

NOTE

：

DRIVERS’ directories are configured according to the type of the Anypos.

Please select your Anypos a directory depending on the type of Anypos.

TOOLS:

CHECK Self Test Program

DLL Device Link Library (DLL) for device

KEYBOARD Keyboard Programming Software

MANUAL Manual and peripheral instruction

DOSNET Client software to Access Server for DOS.

All above can be downloaded from our website (www.aopos.com

)

Driver Installation

Please install the driver utilities as the following sequences, otherwise it may result in

unpredictable circumstances, such as: unstable system, display mistake, etc, and even you may