User manual

Anypos600 Point of Service
have to reinstall th
e operating system.
Driver Installation of Chipset
The Chipset Driver is on \DRIVERS\CHIPSET subdirectory, run SETUP.EXE and install
driver on prompt, after completing installation, reboot the computer.
Driver Installation of VGA
The VGA Driver is on DRIVERS\VGA letter, run SETUP.EXE and install driver on
prompt, after completing the installation reboot the computer.
Driver Installation of Audio
The Audio Driver is on your DRIVERS\AUDIO letter, run SETUP.EXE and install
driver on prompt.
Driver Installation of LAN
The LAN Driver is on your DRIVERS\LAN letter, run SETUP.EXE and install driver on
prompt.
Driver Installation of Modem
The Modem Driver is on your DRIVERS\Modem letter, run SETUP.EXE and install
driver on prompt.
Driver Installation of 5-wire-resistive touchscreen
1. The 5-wire-resistive touchscreen Driver is on DRIVERS\TOUCHSCREEN\5WIRE
letter, run SETUP.EXE and install driver on prompt., then reboot the computer.
2. Double-click the "TouchKit" icon on the desktop, you should change your touchscreen
settings before you use it (For more information about touchscreen Settings, please refer
to Calibration of the Touchscreen on chapter 4).
Driver Installation of SAW Touchscreen
The Touchscreen Driver is on DRIVERS\TOUCHSCREEN\SAW subdirectory, the
installation may be difference depending on your operating systems.
NOTE： You must have administrator access rights on your Windows 2000/XP
system to install this software. You must also have administrator access rights to run the
touchscreen control panel and calibration applications.
1. Installing touchscreen driver for Windows 2000/XP
15