User manual

Anypos600 Point of Service
CHAPTER 4
SYSTEM TESTING
This chapter gives you detailed explanation of system testing functions.
About Testing
1. The CHECK.EXE is a test program in TOOLS subdirectory in your CD or your HDD,
which is for test of the Printer, the CustDisplay, the Keyboard, the Drawer, MSR,
Scanner, IC Card Reader and Ports.
2. After completing driver installation of Touchscreen, the “GeneralTouch
Touchscreen”will install automatically in “Control Panel” which helps to calibrate and
setup the touchscreen.
CHECK
The main menu contains of five items: SET、CHECK、 HOT、EXIT and HELP. Please
enter the SET for configuration first, otherwise it may result in incorrect testing.
SET― The items are for users to set the system’s configuration, including Printer,
CustDisplay, KeyBoard, Drawer, MSR, Scanner, IC CardReader and Port, etc.
You can use up/down/left/right Arrow Keys to highlight the field and change
the configuration by PgUp/PgDn, (Refer to Product Instruction for more
settings). Save the changes and exit press F2.
CHECK― The submenu includes some items, such as Printer, CustDisplay, KeyBoard,
Drawer, MSR, Scanner, IC CardReader and Port, etc.
Printer: Tests the printer. Input numbers and characters the printer begin to print.
17