User manual

Anypos600 Point of Service
Ensure the printer
prints the same as the typing on the screen. Return from the
sub-menu press Esc.
CustDisplay: Tests the customer display. Ensure the customer display shows the same
numbers and characters as input on prompt. Return by pressing Esc.
KeyBoard: Tests the keyboard, ensure the character and ASCII code displaying on the
screen is the same as the key you press on prompt. Return from the
sub-menu press Esc.
Drawer: Tests the drawer. Open and close the drawer, ensure the screen shows the
status correctly: open, close.
MSR: Tests the Magnet Stripe Reader. Scan a credit card and ensure data scanned
correctly by seeing applicable information on all three tracks from the credit card.
Return from the sub-menu press Esc.
Scanner: Test the Scanner. Scan the barcode on prompt and ensure the information on
the screen. Return from the sub-menu press Esc.
IC CardReader: Tests the IC CardReader. Insert IC Card on prompt, the item will test
the device connection and IC card read and written.
Port: Tests the serial ports and parallel ports on the mainboard.
HOT――For QA
EXIT―― Quit
Setup the Touchscreen
Setup the 5-wires-resistive Touchscreen
After successfully installing the diver, the following icons will appear on your desktop.
click on the “TouchKit” icon on the desktop, the system will enter calibration interface.
18