User manual

Anypos600 Point of Service
Safety information
Before installing and using the Anypos, take note of the following precautions:
 Read all instructions carefully.
 Do not place the unit on an unstable surface, cart, or stand.
 Do not block the slots and opening on the unit, which are provided for ventilation.
 Do not push objects in the ventilation slots as they may touch high voltage components
and result in shock and damage to the components.
 Only use the power source indicated on the marking label. If you are not sure, contact
your dealer or the Power Company.
 The unit uses a three-wire ground cable, which is equipped with a third pin to ground the
unit and prevent electric shock. Do not defeat the purpose of this pin. If your outlet does
not support this kind of plug, contact your electrician to replace your obsolete outlet.
 Do not place anything on the power cord. Place the power cord where it will not be in
the way of foot traffic.
 Follow all warnings and cautions in this manual and on the unit case.
 When replacing parts, ensure that your service technician uses parts specified by the
manufacturer.
 Avoid using the system near water, in direct sunlight, or near a heating device.