User manual

72
Return default parameters
All parameters of handheld unit return to default setting
WARNING: If you wish to return all parameters of the handheld unit, including radio communication
setting, to default setting, please scan the barcode above.
All parameters of cradle return to default setting※
WARNING: If you wish to return all parameters of the cradle, including radio communication
setting, to default setting, please scan the barcode above.
Some parameters of handheld unit return to default setting
WARNING: If you wish to return all parameters of the handheld unit, excluding radio
communication setting, to default setting, please scan the barcode above.
Some parameters of cradle return default value initialization※
WARNING: If you wish to return all parameters of the cradle, excluding radio communication
setting, to default setting, please scan the barcode above.
Note: The settings indicated with (※) are valid only when the cradle is in upgrade ready mode.
Cradle entering upgrade ready mode
Keep pressing the S button on the cradle, until the blue LED is flashing. Then three LEDs will all be
turned ON, this indicates the cradle being upgrade ready mode.